Menu

Life Support for Industry

0

Sika MonoTop 612 (25kg)

R4 Hand Placed / Wet Spray Repair Micro-concrete

Sika® MonoTop-612 is a cement-based, one component low permeability repair micro-concrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.

  • Pre bagged for quality
  • Compatible with Sika® FerroGard® corrosion inhibitors
  • Easy to mix and apply
  • Low shrinkage
  • Good mechanical properties
  • Adjustable consistency
  • Suitable for drinking water contact

£27.50 Excl VAT

Free Shipping on Orders Over £500.00

x

Description

Sika MonoTop 612

R4 Hand Placed / Wet Spray Repair Micro-concrete

Sika® MonoTop-612 is a cement-based, one component low permeability repair micro-concrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.

Usage

  • For repairing all types of structures
  • Suitable for application in Marine environments
  • Horizontal, vertical and overhead repairs
  • Hand applied repairs
  • Spray applied repairs
  • For exterior and interior use
  • In place of R1, R2 & R3 mortars

System Structure

Sika MonoTop® -612 is part of the Sika® MonoTop Concrete Repair System

APPROVALS / STANDARDS

  • Resistivity: Mott MacDonald Report No. 37423/DA/001.Rev A
  • Conforms to the requirements of BS EN 1504-3 R4 Classification

Product Information

Chemical Base

Portland cement, polymer redispersable powder, selected aggregates and additives

Shelf Life

6 months.

Storage Conditions

Store in original unopened, sealed and undamaged packaging in dry and cool conditions.

Density

Fresh mortar density: ~ 2.10 kg/l

Maximum Grain Size

Dmax: 3 mm

Soluble Chloride Ion Content

< 0.01%

Sika MonoTop®-612 is part of the range of Sika mortars complying with the relevant part of European Standard EN 1504 and comprising of:

Bonding Primer / Reinforcement Corrosion Protection

 

Sika MonoTop®-610

Carbonation

SikaTop® Armatec® 110 EpoCem®

Chlorides

Repair Mortars

 

All Sika® MonoTop® and  SikaCem® Gunite series

 

Smoothing Coat / Pore Filler

 

Sika MonoTop®-620

Normal use

Sikagard®-720 EpoCem®

Demanding requirements

Corrosion Inhibitor

 

Sika® FerroGard®-903+

 

Anti-Carbonation Protective Coatings

All  Sikagard® Anti- Carbonation protective coatings

MIXING

Sika MonoTop-612 can be mixed with a low speed (< 500 rpm) hand drill mixer or for machine application, using a force action mixer 2 to 3 bags or more at once depending the type and size of mixer. In small quantities, Sika MonoTop-612 can also be manually mixed.

Pour the recommended water in a suitable mixing container. While stirring slowly, add the powder to the water and mix thoroughly at least for 3 minutes adding additional water during the mixing time if necessary to the maximum specified amount and adjust to the required consistency.

APPLICATION

Reinforcement Corrosion Protection Coating:
Where a reinforcement coating is required the application of a repair mortar shall be applied wet on dry onto the reinforcement corrosion protection.

Refer to the System Information above for compatible Sika products and refer to the relevant Product Data Sheet for more detailed information about the reinforcement corrosion product.

Bonding Primer:

On a well prepared and roughened substrate a bonding primer is generally not required for this product. 

When a bonding primer is required, refer to the System Information above for compatible Sika products and refer to the relevant Product Data Sheet for instructions. 

A small amount of Sika MonoTop-612 can also be mixed slightly wetter than normal and used as a scratch coat to fill any deep cavities or pits in the base of the substrate.

Any bonding primer shall be applied on a pre-wet substrate and subsequent application of the scratch coat /repair mortar shall be applied wet on wet onto the bonding primer.

Repair Mortar Application:

Sika MonoTop-612 can be applied either manually using traditional techniques or mechanically using wet spray equipment.

Thoroughly pre-wet the prepared substrate a recommended 2 hours before application. Keep the surface wet and do not allow to dry. Before application remove excess water e.g. with a clean sponge.

The surface shall appear a dark matt appearance without glistening and surface pores and pits
shall not contain water. 

When manually applying first make a scratch coat by firmly scraping the repair mortar over the base of the substrate surface to form a thin layer and fill any deep cavities. Ensure the whole surface to be repaired is covered by the scratch coat. For vertical applications, build up layers from bottom to top by pressing mortar well into the repair area.

The surface can be finished according to the surface texture requirements using a float. Do not over-trowel as this may lead to surface cracking.

CURING TREATMENT

Protect the fresh mortar immediately from premature
drying for a minimum of 3 days using an appropriate curing method e.g. curing compound, moist geotextile membrane, polythene sheet etc.

Curing compounds shall not be used when they adversely affect subsequently applied products and systems.

Reference shall also be made to BS EN1504-10 for specific requirements.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use.
Hardened/cured material can only be mechanically removed.

 

Additional information

Weight 25 kg
CPRL Colours

Grey

Brand

Sika

Reviews

There are no reviews yet.

Be the first to review “Sika MonoTop 612 (25kg)”

Your email address will not be published. Required fields are marked *